Pattern Settings Panel

For Everyone

At a glance

The Panel Settings panel allows you to create and adjust patterns on US State maps and bar charts. Be sure to use the in-built contrast checker to ensure Section 508 compliance.

Where to Use

Visualization Types

This panel displays for US State Maps and bar charts.

Maps - Add a Geo Pattern

Add (Geo) Pattern: Click to add a pattern to the map

  • Select Column or Pattern 1: Open the dropdown to set the pattern.
    • Data Key: Select the column to set the pattern off of.
    • Data Value: Enter the value. It must be an exact match.
    • Label (Optional): Add a label for the pattern if needed.
    • Pattern Type: Select from circles, waves, or lines.
    • Pattern Size: Set small, medium, or large.
    • Pattern Color: Set a hex color for the pattern. If the color does not pass Section 508 contrast rules against the background colors, the visualization will not render.

Bar Charts - Add a Pattern

Pattern Application: Choose how the pattern is applied.

  • Match a data value: Apply the pattern when the selected Data Key matches the Data Value exactly.
  • Cover a portion of a bar: Use a numeric data column to cover part of each bar in a regular Bar chart or a Combo chart. Portion patterns require a linear value axis and are not available for stacked bars or lollipop charts.

For Data Value Patterns:

  • Data Key: Select the column to set the pattern off of.
  • Data Value: Enter the value. It must be an exact match.
  • Label (Optional): Add a label for the pattern if needed.
  • Pattern Type: Select from circles, waves, or lines.
  • Pattern Size: Set small, medium, or large.
  • Pattern Color: Set a hex color for the pattern. If the color does not pass Section 508 contrast rules against the background colors, the visualization will not render.

For Cover a Potion of a Bar:

  • Target Bar Series: Select the bar series that receives the portion pattern. Each bar series can have one portion pattern. For Combo charts, only bar series are available.
  • Pattern Value Column: Select the data column containing the absolute amount of each bar that receives the pattern.
  • Placement: Choose where the patterned portion appears.
    • Beginning: Place the pattern at the bottom of a vertical bar or the left side of a horizontal bar.
    • End: Place the pattern at the top of a vertical bar or the right side of a horizontal bar.
Content Source
Office of Communications
About This Page
Published: November 21, 2024
Updated: August 22, 2024

This page was last updated on this date. Updates may include minor edits, image changes, or other modifications to page content.

Reviewed: November 21, 2024

The information on this page was last reviewed by subject matter experts to ensure accuracy.