Skip directly to search Skip directly to A to Z list Skip directly to site content
CDC Home

Top Five Industries Resulting in Injuries from Acute Chemical Incidents — Hazardous Substance Emergency Events Surveillance, Nine States, 1999–2008

Ayana R. Anderson, MPH

Jennifer Wu, MS

Division of Toxicology and Human Health Sciences, Agency for Toxic Substances and Disease Registry, CDC


Corresponding author: Ayana R. Anderson, Division of Toxicology and Human Health Sciences, Agency for Toxic Substances and Disease Registry, CDC. Telephone: 770-488-3906; E-mail: aranderson@cdc.gov.

Abstract

Problem/Condition: Because industries using and/or producing chemicals are located in close proximity to populated areas, U.S. residents are at risk for unintentional chemical exposures.

Reporting Period: 1999–2008.

Description of System: The Hazardous Substances Emergency Events Surveillance (HSEES) system was operated by the Agency for Toxic Substances and Disease Registry during January 1991–September 2009 to collect data that would enable researchers to describe the public health consequences of chemical releases and to develop activities aimed at reducing the harm from such releases. This report summarizes data for the top five industries resulting in injuries from an acute chemical incident (lasting <72 hours) occurring in the nine states (Colorado, Iowa, Minnesota, New York, North Carolina, Oregon, Texas, Washington, and Wisconsin) that participated in HSEES during its last 10 full years of data collection (1999–2008).

Results: Five industries (truck transportation, educational services, chemical manufacturing, utilities, and food manufacturing) accounted for approximately one third of all incidents in which persons were injured as a result of unintentional release of chemicals; the same five industries were responsible for approximately one third of all persons injured as a result of such releases.

Interpretation: Acute chemical incidents in these five industries resulted in serious public health implications including the need for evacuations, morbidity, and mortality.

Public Health Implications: Targeting chemical incident prevention and preparedness activities towards these five industries provides an efficient use of resources for reducing chemical exposures. A variety of methods can be used to minimize chemical releases in industries. One example is the Occupational Safety and Health Administration's hierarchy of controls model, which focuses on controlling exposures to occupational hazards. The hierarchy includes elimination, substitution, engineering controls, administrative controls, and use of personal protective equipment.

Introduction

As the United States has become more industrialized and the use of chemicals has increased, the likelihood of unintentional releases of hazardous materials also has increased (1,2). Hazardous substance releases can occur anywhere, including in private homes, warehouses, and manufacturing facilities. Unintentional releases of hazardous substances can have serious consequences, including adverse health outcomes and in some cases death, need for decontamination, evacuations, environmental degradation, and financial losses. To prevent morbidity and mortality resulting from unintentional releases of chemicals, public health authorities must know where these incidents occur and where the potential exists to prevent harm.

The Hazardous Substances Emergency Events Surveillance (HSEES) system database provides information on the characteristics and spatial and temporal dimensions of hazardous chemical releases within the states that participated in the surveillance system. This report summarizes data for the top five industries resulting in injuries from acute chemical incidents occurring in selected states during 1999–2008 and is a part of a comprehensive surveillance summary (3). Public and environmental health and safety practitioners, worker representatives, emergency planners, preparedness coordinators, industry managers, emergency responders, and others who prepare for or respond to chemical incidents can use the findings in this report to prepare for and prevent chemical incidents and injuries.

Methods

This report is based on data reported to HSEES system by health departments in nine states (Colorado, Iowa, Minnesota, New York, North Carolina, Oregon, Texas, Washington, and Wisconsin) that participated in HSEES during its last 10 complete calendar years of data collection (1999–2008). Data from 2009 were not included because several states ended data collection mid-year. Case definitions, exclusion criteria, and 2006 changes in reporting guidelines used for this analysis are described (Box 1).

This analysis focuses on the top five industries with injured persons. HSEES defined an injured person as a person who experienced at least one documented acute (i.e., occurring in <24 hours) adverse health effect or who died as a consequence of the event. Injured persons must have had at least one injury type or symptom, and up to seven could be listed (4). The top five identified NAICS codes were sectors 311 (food manufacturing), 325 (chemical manufacturing), 484 (truck transportation), 611 (educational services), and 221 (utilities). Information about these sectors is summarized (Box 2).

States obtained data about hazardous substance releases from various sources including state and local environmental protection agencies, police and fire departments, poison control centers, hospitals, local media and federal databases (e.g., the Department of Transportation's Hazardous Material Incident Reporting Systems [HMIRS] and the U.S. Coast Guard's National Response Center [NRC]).

Descriptive analyses were performed by using SAS software (version 9.2) to describe the top industries with injured persons. Industries were identified using the Standardized Industrial Classification (SIC) for 1999-2001 data, and the 2002 North American Industry Classification System (NAICS) for 2002–2008 data. NAICS is the standard used by Federal statistical agencies to classify business establishments for the purpose of collecting, analyzing, and publishing statistical data related to the U.S. business economy (5). For this analysis, an excel file was used that indicated which SIC codes correspond to NAICS codes so that all were classified the same for consistency. The top five three-digit NAICS industries causing injury were identified, and additional analysis was performed on those incidents.

Results

During 1999-2008, of the 57,975 hazardous substance incidents that occurred, 4,621 (8%) incidents resulted in 15,506 persons being injured. Incidents at the following top five industries resulted in over one third (36%) of injured persons: chemical manufacturing (1,753 persons), educational services (1,562 persons), truck transportation (869 persons), food manufacturing (760 persons) and utilities (578 persons). These top five industries represented 30% of incidents with injured persons. These top five industries reported 478 evacuations in which 103,530 persons were evacuated. Educational services reported the highest number of evacuations and evacuees (144 and 56,269, respectively). Of the 156 incidents that reported shelter in place, the industry with the highest number of reported a shelter in place (26) was chemical manufacturing (Table 1).

In HSEES, up to two contributing causal factors can be reported. The number of persons injured associated with contributing factors reported by the top five industries are summarized (Table 2). Equipment failure was associated with the highest frequency of injured persons for chemical manufacturing (1,272) and food manufacturing (489). Chemical manufacturing also had a high number of injured persons associated with a system or process upset (any glitch in the system that upsets the process; the problem has to be specific to the facility) (386). Human error was associated with the highest frequency of injured persons for educational services (746), truck transportation (629) and utilities (250). For utilities, equipment failure was a close second (242). Educational services also had a high frequency of injured persons associated with intentional or illegal acts (447).

For incidents with only one chemical released, ammonia (141), chlorine (66), carbon monoxide (52), hydrochloric acid (52), and sulfuric acid (44) were the most commonly reported chemicals for the top five industries (Table 3). Ammonia was the most commonly released chemical in chemical manufacturing and food manufacturing. Chlorine was the most commonly reported chemical released in utilities, as was hydrochloric acid for truck transportation and sulfuric acid for educational services.

Employees represented 51% (2,824) of the injured persons and were the most commonly reported category for all but educational services (Table 4). Students were the most commonly reported category of injured persons for educational services (1,092), followed by employees (412). Students were also the second most commonly reported injured person category for chemical manufacturing (407). The second most commonly reported injured person category for food manufacturing (49), truck transportation (236), and utilities (181) was the general public.

The majority of the injured persons were either treated at the hospital and not admitted (48%) or treated on the scene (31%) (Table 5) Approximately 2% (122) of the injuries resulted in fatalities; the majority (90 [74%]) of the fatalities were reported in the truck transportation industry, which could have been the result of trauma from collisions or rollovers. The most frequently reported symptom overall for the top five industries was respiratory irritation (2,801 [35%]). This was also the most frequently reported symptom for chemical manufacturing (919 [39%]), educational services (763 [28%]), food manufacturing (574 [43%]), and utilities (295 [31%]) and was the second most frequently reported symptom for truck transportation. Nonchemical related traumas were the most frequently reported symptom for truck transportation (299 [33%]), again likely resulting from vehicle collisions or rollovers (Table 6).

Discussion

This analysis described the five industries with the highest frequencies of injured persons associated with acute chemical releases. The top five chemicals identified in this report as occurring most frequently in the top five industries were also the top five chemicals causing injury (6). Although chemical releases that occurred in chemical manufacturing resulted in the most injured persons, releases during truck transportation had the most incidents with injured persons and the most fatalities. Many of the injuries and fatalities that occurred during truck transportation were trauma related. Precautions can be taken to ensure safety if a release occurs. To protect the public health and environment, the shipper is responsible for all packaging, labeling, and marking of shipments (7). Labeling should be clear and legible for the transporters. Transporters should be aware of the potential dangers of the chemicals they are transporting and know whom to contact if a release occurs. The contributing factors that resulted in the most injured persons were equipment failure for chemical manufacturing and food manufacturing, and human error for educational services, truck transportation, and utilities. Various measures can be taken to prevent releases associated with equipment failure, including routine equipment inspections and maintenance (8-10). To ensure safety of the employees who work in manufacturing industries, the Occupational Safety and Health Administration (OSHA) requires appropriate chemical education and training. Also all employers with hazardous chemicals in their workplace must have labels and safety sheets for chemicals to which their workers might be exposed (11). For the transportation industry, the Pipeline and Hazardous Materials Safety Administration (PHMSA) has established policies and standards in addition to providing education to prevent hazardous chemical releases. PHMSA's goal is to prepare the public and first responders to reduce consequences if an incident occurs (12).

Because these five industries had a high frequency of students and general public injured, and evacuations, it is important for communities near these facilities to have a strong public health response infrastructure. It is important to include local emergency response, including first responders, hospitals, the manufacturing industry, labor representatives, educational facilities, political entities and the public, so they can develop a plan to respond to and prevent acute chemical releases (9,13). With educational services having a high frequency of injured persons associated with human error and intentional or illegal acts, proper chemical use and management (i.e. storing, inventory) is essential to protect the building's occupants (14). Proper training and supervision of students and instructors can mitigate school chemical releases (15). For releases caused by intentional or illegal acts, a focus on preventing students from illegally or intentionally releasing chemicals in education settings could mitigate adverse public health outcomes. Exploring the implementation of stricter enforcement might discourage students from experimenting with chemicals that can have serious financial and public health consequences. Also, proper storage of chemicals such as mercury can prevent children from unlawfully obtaining such chemicals and improperly releasing them into the environment. Another safety measure that could reduce injuries is the safe removable of unused, outdated, potentially dangerous chemicals from schools (16).

Ammonia was the overall most frequently reported chemical released and the most frequently released for chemical manufacturing and food manufacturing. Ammonia is used as a refrigerant in food manufacturing (17) and in many manufacturing processes. Exposure to ammonia can irritate skin, eyes, and the respiratory system and in extreme cases cause death (17). To mitigate morbidity and mortality associated with ammonia in food manufacturing, industries could use refrigerants gases that are not as flammable or toxic as ammonia, such as carbon dioxide (18,19). In additional, education initiatives can raise awareness about the dangers of ammonia, safer alternatives (where applicable) and proper management of ammonia. The Wisconsin HSEES Ammonia Awareness Day was designed to target workers in industries that used ammonia as refrigerant. Wisconsin used electronic mail and a Web page to disseminate information to raise awareness about ammonia (18).

Within the utilities industry, chlorine was the most frequently reported chemical released. The utilities industry includes water and sewage. Over 550 water treatment facilities have converted to safer alternatives to chlorine gas. Some safer alternatives to chlorine gas include liquid chlorine bleach (sodium hypochlorite) and ultraviolet light (20).

In addition, OSHA's Hierarchy of Controls model to control exposures to occupational hazards includes (in order of effectiveness) elimination, substitution, engineering control, administrative controls, and personal protective equipment (PPE) (21). Safer alternatives to some of the chemicals being used in industries exist (e.g., use of ultraviolet light instead of chlorine gas in water treatment facilities and carbon dioxide instead of ammonia in food manufacturing). However, elimination and/or substitution of chemicals can be difficult in implement in industries (21). When elimination o substitution is not an option, industries ensure that proper engineering controls are in place that will remove a hazard or implement a barrier to prevent chemical exposure. Although this option can have high initial costs, long-term operating costs can be lower (21). Administrative control and PPE are the least effective because they are not well controlled and require a substantial effort by the employees (22). These last two controls can be very costly in the long term (21). Other potential ways to protect surrounding populations and the general public and to decrease morbidity and mortality include maintaining a sufficient emergency mitigation systems and establishing adequate buffer zone distances to surrounding populations (22). Collaboration with industries, surrounding responders, hospitals, and community leaders to ensure that a well devised response plan is in place is important so that if a chemical release occurs, all parties involved are in accord.

Limitations

The findings in this report are subject to at least four limitations. First, despite the attempts to make the case definition the same among states, results are not comparable between states because reporting to HSEES was voluntary and data sources varied by state. Second, the results from these nine states might not be representative of the entire United States. Third, inconsistencies within and across states likely exist because reporting capacity (e.g., staffing) or local requirements varied. Specifically, certain states and localities had more stringent reporting regulations than the federal regulations or had more resources to conduct surveillance, possibly resulting in more reported incidents. These factors might have influenced the quality and number of reports or level of detail provided about the incidents. Finally, the changes in reporting guidelines in 2006 (e.g., the reporting requirement changed based on the amount of the release to >10 pounds or >1 gallon or any release amount for substances on the HSEES mandatory list) could have led to increased reporting of some types of incidents and decreased reporting of others. This also could have affected the reports of industries that had releases.

Conclusion

With thousands of chemicals being released annually and limited resources, it is important to target chemicals with the greatest public health implications. This analysis shows that five industries accounted for approximately one third of all incidents with injuries and 30% of injured persons. The top five chemicals in these five industries are also the top five chemicals causing injury in this time frame for all incidents, making them a good target for prevention efforts. Knowing where chemical releases occur and the magnitude of impact is important as it enables public health authorities to allocate and develop resources and prevention efforts efficiently by using the hierarchy of controls to select the best control methods for the situation and following guidelines and recommendations of OSHA and PHMSA.

References

  1. Falk H. Industrial/chemical disasters: medical care, public health and epidemiology in the acute phase. In: Bourdeau P, Green G, eds. Methods for assessing and reducing injury from chemical accidents. John Wiley & Sons; 1989: 106-14.
  2. Manassaram DM, Orr MF, Kaye WE. Hazardous substances events associated with the manufacturing of chemicals and allied products. J Hazard Mater 2003;104:123-35.
  3. CDC. Hazardous Substances Emergency Events Surveillance, nine states, 1999-2008. MMWR Surveill Summ 2015;64(No. SS-2).
  4. Agency for Toxic Substances and Disease Registry. Hazardous Substances Emergency Events Surveillance: biennial report 2007-2008. Atlanta, GA: US Department of Health and Human Resources, Agency for Toxic Substances and Disease Registry, CDC. Available at http://www.atsdr.cdc.gov/HS/HSEES/annual2008.html.
  5. US Census Bureau. 2002 North American Industry Classification System (NAICS) Washington, DC: US Census Bureau; 2002. Available at http://www.census.gov/cgi-bin/sssd/naics/naicsrch?chart=2002.
  6. Anderson A. Top five chemicals resulting in injuries from acute chemical incidents-Hazardous Substances Emergency Events Surveillance, nine states, 1999-2008. In: CDC. Hazardous Substances Emergency Events Surveillance, nine states, 1999-2008. MMWR Surveill Summ 2015;64(No. SS-2).
  7. US Department of Transportation. Hazardous materials regulations. Washington, DC: US Department of Transportation Pipeline and Hazardous Materials Safety Administration; 2015. Available at http://www.phmsa.dot.gov/regulations.
  8. Lees RE, Laundry BR. Increasing the understanding of industrial accidents: an analysis of potential major injury records. Can J Public Health 1989;80:423-6.
  9. US Environmental Protection Agency. Why accidents occur: insights from the Accidental Release Information Program. Washington, DC: US Environmental Protection Agency; 1989. Available at http://nepis.epa.gov/Adobe/PDF/10003LZJ.PDF.
  10. Uth HJ. Trends in major industrial accidents in Germany. J Loss Prev Process Ind 1999;12:69-73.
  11. Occupational Safety and Administration. Chemical hazards and toxic substances. Washington, DC: US Department of Labor, Occupational Safety and Administration; 2014. Available at https://www.osha.gov/SLTC/hazardoustoxicsubstances/index.html.
  12. Pipeline and Hazardous Materials Safety Administration. Mission and goals. Washington, DC: US Department of Transportation, Pipeline and Hazardous Materials Safety Administration; 2014. Available at http://www.phmsa.dot.gov/about/mission.
  13. Broughton E. The Bhopal disaster and its aftermath: a review. Environ Health 2005;4:6.
  14. Jones SE, Axelrad R, Wattigney WA. Healthy and safe school environment, Part II, Physical school environment: results from the School Health Policies and Programs Study 2006. J Sch Health 2007;77:544-56.
  15. Orr M. School science class chemical incidents. Interstate Chemical Threats Workgroup [Webinar]. Atlanta, GA: US Department of Health and Human Services, Agency for Toxic Substances and Disease Registry; 2012. Available at http://ictw.net/members/wp-content/uploads/2011/07/Orr-ICTW-school-lab-powerpoint-final.pdf.
  16. Wattigney WA, Rice N, Cooper DL, Drew JM, Orr MF. State programs to reduce uncontrolled ammonia releases and associated injury using the Hazardous Substances Emergency Events Surveillance System. J Occup Environ Med 2009;51:356-63.
  17. Agency for Toxic Substances and Disease Registries. Toxicological profile for ammonia: health effects. Atlanta, GA: US Department of Health and Human Services, Agency for Toxic Substances and Disease Registries; 2004. Available at http://www.atsdr.cdc.gov/ToxProfiles/tp126-c3.pdf.
  18. Mary Kay O'Connor, Process Safety Center. Challenges in implementing inherent safety principals in new and existing chemical processes. College Station, TX: Mary Kay O'Connor Process Safety Center; 2002. Available at http://psc.che.tamu.edu/wp-content/uploads/whitepaper_inherentsafety1.pdf.
  19. Pearson, S. New, natural and alternative refrigerants. Washington, DC: Environmental Protection Agency; 2003. Available at http://www.epa.gov/greenchill/downloads/New_Natural_and_Alternative_Refrigerants.pdf.
  20. Rushing R, Orum P. Leading water utilities secure their chemicals. Washington, DC: Center for American Progress; 2010. Available at https://www.americanprogress.org/issues/security/news/2010/03/02/7538/leading-water-utilities-secure-their-chemicals.
  21. Occupational Safety Administration. Course 700: introduction to safety management. Washington, DC: US Department of Labor, Occupational Safety and Administration; 2014. Available http://www.oshatrain.org/courses/mods/700m5.html.
  22. Orum P. Chemical security 101. Washington, DC: Center for American Progress; 2008. Available at https://www.americanprogress.org/issues/security/report/2008/11/19/5203/chemical-security-101.

BOX 1. Case definitions, exclusions, and reporting guidelines — Hazardous Substances Emergency Events Surveillance system, nine states,* 1999–2008

Case definition for acute chemical release

An acute chemical release is an uncontrolled or illegal spill or release lasting <72 hours of an uncontrolled or illegal spill or release of any hazardous substance meeting specific predefined criteria. Releases of petroleum only (e.g., crude oil or gasoline) were excluded from the Hazardous Substances Emergency Events Surveillance (HSEES) system because the Comprehensive Environmental Response Compensation and Liability Act (Superfund legislation) excludes it from Agency for Toxic Substances and Disease Registry authority.

Case definition for threatened release

A threatened release is an incident that resulted in a public health action such as an evacuation or road closure.

Changes in reporting guidelines to improve the uniformity of reporting among states and to maximize resources

  • Before 2006, HSEES collected information on any chemical release if the amount was required by federal, state, or local law to be cleaned up.
  • Starting in 2006, HSEES collected information on chemical releases if the amount was >10 lbs or >1 gallon or in any amount if the chemical was on the HSEES mandatory reporting list of highly toxic chemicals (e.g., anhydrous ammonia, arsenic, hydrazine, methyl isocyanate, nitric acid, and sulfuric acid).

In 2006, reports of smokestack emissions above permitted values of carbon monoxide, sulfur oxides, and nitrogen oxides were excluded because numerous related incidents occurred but rarely resulted in acute public health impact.

* Colorado, Iowa, Minnesota, New York, North Carolina, Oregon, Texas, Washington, and Wisconsin.

Comprehensive Environmental Response, Compensation, and Liability Act of 1980, Pub. L. No. 95 510 (Dec. 11, 1980), as amended by the Superfund Amendments and Reauthorization Act of 1986, Pub. L. No. 99 499 (Oct. 17, 1986), 42 U.S.C. 9604(i).


BOX 2. Top five North American Industry Classification System codes associated with injuries from acute chemical incidents

Sector 311 Food Manufacturing

Industries in the Food Manufacturing subsector transform livestock and agricultural products into products for intermediate or final consumption. The industry groups are distinguished by the raw materials (generally of animal or vegetable origin) processed into food products. The food products manufactured in these establishments are typically sold to wholesalers or retailers for distribution to consumers, but establishments primarily engaged in retailing bakery and candy products made on the premises, not for immediate consumption, are included. Establishments primarily engaged in manufacturing beverages are classified elsewhere.

Sector 325 Chemical Manufacturing

The Chemical Manufacturing subsector is based on the transformation of organic and inorganic raw materials by a chemical process and the formulation of products. This subsector distinguishes the production of basic chemicals that comprise the first industry group from the production of intermediate and end products produced by further processing of basic chemicals that make up the remaining industry groups.

Sector 484 Truck Transportation

Industries in the Truck Transportation subsector provide over-the-road transportation of cargo using motor vehicles such as trucks and tractor trailers. The subsector is subdivided into general freight trucking and specialized freight trucking. This distinction reflects differences in equipment used, type of load carried, scheduling, terminal, and other networking services. General freight transportation establishments handle a wide variety of general commodities, generally palletized and transported in a container or van trailer. Specialized freight transportation is the transportation of cargo that, because of size, weight, shape, or other inherent characteristics, requires specialized equipment for transportation.

Sector 611 Educational Services

Educational Services comprises establishments that provide instruction and training in a wide variety of subjects. This instruction and training is provided by specialized establishments such as schools, colleges, universities, and training centers. These establishments might be privately owned and operated for profit or not for profit, or they might be publicly owned and operated. They might also offer food and accommodation services to their students.

Sector 221 Utilities

Industries in the Utilities subsector provide electric power, natural gas, steam supply, water supply, and sewage removal through a permanent infrastructure of lines, mains, and pipes. Establishments are grouped together based on the utility service provided and the particular system or facilities required to perform the service.


TABLE 1. Number of injured persons and frequency of selected incidents, by top five industries compared with all incidents with injured persons — Hazardous Substances Emergency Events Surveillance system, nine states,* 1999–2008

Number

Chemical manufacturing

Educational services

Food manufacturing

Truck transportation

Utilities

All incidents

Incidents with injured persons

228

241

172

516

218

4,621

Injured persons

1,753

1,562

760

869

578

15,506

Incidents with evacuations

71

144

104

85

74

1,439

Persons evacuated

17,170

56,269

12,781

11,428

5,882

186,859

Incidents with shelter-in-place order

26

15

8

9

12

156

* Colorado, Iowa, Minnesota, New York, North Carolina, Oregon, Texas, Washington, and Wisconsin.


TABLE 2. Number of persons injured, by associated contributing factors and top five industries — Hazardous Substances Emergency Events Surveillance system, nine states,* 1999–2008

Factor

Chemical manufacturing

Educational services

Food manufacturing

Truck transportation

Utilities

Total

Equipment failure

1,272

383

489

139

242

2,525

Human error

369

746

279

629

250

2,273

Intentional or illegal acts

6

447

5

20

31

509

System/process upset

386

2

30

0

2

420

Vehicle/vessel accident

12

0

5

372

0

389

Improper mixing

162

118

42

0

51

373

Explosion

161

43

13

10

62

289

Fire

115

16

16

8

72

227

Improper filling, loading or packaging

57

43

1

105

16

222

System start up/shut down

147

55

1

0

8

211

Unauthorized/improper dumping

5

6

2

27

118

158

Performing maintenance

15

100

25

1

13

154

Power failure/electrical problems

86

1

0

0

3

90

Bad weather conditions/natural disasters

4

38

0

16

3

61

Total

2,797

1,998

908

1,327

871

7,901

* Colorado, Iowa, Minnesota, New York, North Carolina, Oregon, Texas, Washington, and Wisconsin.

More than one contributing factor can be reported in the HSEES database; therefore, the total number of injured persons associated with contributing factors is higher than the total number of injured persons.


TABLE 3. Number of top five single chemicals released, by top five industries — Hazardous Substances Emergency Events Surveillance system, nine states,* 1999–2008

Chemical

Chemical manufacturing

Educational services

Food manufacturing

Truck transportation

Utilities

Total

Ammonia

19

5

98

14

5

141

Chlorine

13

10

8

1

34

66

Carbon monoxide

2

11

4

4

31

52

Hydrochloric acid

6

11

0

18

17

52

Sulfuric acid

7

12

1

16

8

44

Total

47

49

111

53

95

355

* Colorado, Iowa, Minnesota, New York, North Carolina, Oregon, Texas, Washington, and Wisconsin.


TABLE 4. Number and percentage of persons injured for top five industries, by category — Hazardous Substances Emergency Events Surveillance system, nine states,* 1999–2008

Category

Chemical manufacturing

Educational services

Food manufacturing

Truck transportation

Utilities

Total

No.

(%)

No.

(%)

No.

(%)

No.

(%)

No.

(%)

No.

(%)

Employee

9

(48)

412

(26)

687

(90)

555

(64)

337

(58)

2,824

(51)

Student

407

(23)

1,092

(70)

0

(0)

3

(0)

0

(0)

1,502

(27)

General public

391

(22)

40

(3)

49

(6)

236

(27)

181

(31)

897

(16)

Responders

122

(7)

18

(1)

24

(3)

74

(9)

60

(10)

298

(5)

Firefighter

74

(4)

14

(1)

17

(2)

22

(3)

30

(5)

157

(3)

Police officer

17

(1)

2

(0)

6

(1)

35

(4)

20

(3)

80

(1)

Employee, response team

22

(1)

2

(0)

1

(0)

6

(1)

3

(1)

34

(1)

EMT personnel

3

(0)

0

(0)

0

(0)

7

(1)

6

(1)

16

(0)

Responder, unknown type

6

(1)

0

(0)

0

(0)

4

(0)

1

(0)

11

(0)

Total,§

1,753

(100)

1,562

100

760

(99)

868

(100)

578

99

5,521

(99)

* Colorado, Iowa, Minnesota, New York, North Carolina, Oregon, Texas, Washington, and Wisconsin.

Missing = 1.

§ Not all percentages equal 100 due to rounding.


TABLE 5. Number and percentage of persons injured for top five industries, by disposition of injured person — Hazardous Substances Emergency Events Surveillance system, nine states,* 1999–2008

Disposition

Chemical manufacturing

Educational services

Food manufacturing

Truck transportation

Utilities

Total

No.

(%)

No.

(%)

No.

(%)

No.

(%)

No.

(%)

No.

(%)

Treated at hospital (not admitted)

531

(30)

790

(51)

533

(70)

456

(53)

341

(59)

2,651

(48)

Treated on scene (first aid)

862

(49)

542

(35)

102

(13)

85

(10)

123

(21)

1,714

(31)

Treated at hospital (admitted)

103

(6)

26

(2)

60

(8)

158

(18)

47

(8)

394

(7)

Injury reported by official

98

(6)

95

(6)

9

(1)

24

(3)

16

(3)

242

(4)

Seen by private physician within 24 hours

88

(5)

39

(2)

34

(5)

31

(4)

10

(2)

202

(4)

Observation at hospital, no treatment

59

(3)

58

(4)

10

(1)

23

(3)

21

(4)

171

(3)

Death

10

(1)

0

(0)

3

(0)

90

(10)

19

(3)

122

(2)

Unknown

2

(0)

12

(1)

9

(1)

1

(0)

1

(0)

25

(1)

Total

1,753

(100)

1,562

(101)

760

(99)

868

(101)

578

(100)

5,521

(100)

* Colorado, Iowa, Minnesota, New York, North Carolina, Oregon, Texas, Washington, and Wisconsin.

Not all percentages equal 100 due to rounding.


TABLE 6. Number and percentage of injuries for top five industries, by type of industry - Hazardous Substances Emergency Events Surveillance system, nine states,* 1999-2008

Type of injury

Chemical manufacturing

Educational services

Food manufacturing

Truck transportation

Utilities

Total

No.

(%)

No.

(%)

No.

(%)

No.

(%)

No.

(%)

No.

(%)

Respiratory irritation

919

(39)

763

(28)

574

(43)

250

(28)

295

(31)

2,801

(35)

Eye irritation

303

(13)

452

(17)

196

(15)

83

(9)

69

(7)

1,103

(14)

Headache

252

(11)

442

(16)

207

(16)

42

(5)

116

(12)

1,059

(13)

Gastrointestinal problems

187

(8)

346

(13)

117

(9)

57

(6)

120

(13)

827

(10)

Dizziness/central nervous system

162

(7)

371

(14)

53

(4)

36

(4)

136

(14)

758

(9)

Skin irritation

151

(6)

139

(5)

28

(2)

42

(5)

32

(3)

392

(5)

Short of breath

76

(3)

94

(3)

41

(3)

12

(1)

19

(2)

242

(3)

Other

120

(5)

31

(1)

24

(2)

16

(2)

49

(5)

240

(3)

Trauma (nonchemically related)

45

(2)

16

(1)

7

(1)

299

(33)

12

(1)

206

(3)

Burns (chemically related)

34

(1)

41

(2)

31

(2)

26

(3)

34

(4)

166

(2)

Trauma (chemically related)

40

(2)

8

(0)

4

(0)

8

(1)

36

(4)

96

(1)

Burns (thermal)

31

(1)

19

(1)

20

(2)

19

(2)

14

(1)

86

(1)

Heart problems

12

(1)

5

(0)

17

(1)

2

(0)

11

(1)

47

(1)

Heat stress

4

(0)

3

(0)

4

(0)

3

(0)

6

(1)

20

(0)

Total

2,336

(99)

2,730

(101)

1,323

(100)

895

(99)

949

(99)

8,043

(100)

* Colorado, Iowa, Minnesota, New York, North Carolina, Oregon, Texas, Washington, and Wisconsin.

Total is higher than number of injured persons because persons could report more than one injury.



Use of trade names and commercial sources is for identification only and does not imply endorsement by the U.S. Department of Health and Human Services.

References to non-CDC sites on the Internet are provided as a service to MMWR readers and do not constitute or imply endorsement of these organizations or their programs by CDC or the U.S. Department of Health and Human Services. CDC is not responsible for the content of pages found at these sites. URL addresses listed in MMWR were current as of the date of publication.


All MMWR HTML versions of articles are electronic conversions from typeset documents. This conversion might result in character translation or format errors in the HTML version. Users are referred to the electronic PDF version (http://www.cdc.gov/mmwr) and/or the original MMWR paper copy for printable versions of official text, figures, and tables. An original paper copy of this issue can be obtained from the Superintendent of Documents, U.S. Government Printing Office (GPO), Washington, DC 20402-9371; telephone: (202) 512-1800. Contact GPO for current prices.

**Questions or messages regarding errors in formatting should be addressed to mmwrq@cdc.gov.

 
USA.gov: The U.S. Government's Official Web PortalDepartment of Health and Human Services
Centers for Disease Control and Prevention   1600 Clifton Road Atlanta, GA 30329-4027, USA
800-CDC-INFO (800-232-4636) TTY: (888) 232-6348 - Contact CDC–INFO
A-Z Index
  1. A
  2. B
  3. C
  4. D
  5. E
  6. F
  7. G
  8. H
  9. I
  10. J
  11. K
  12. L
  13. M
  14. N
  15. O
  16. P
  17. Q
  18. R
  19. S
  20. T
  21. U
  22. V
  23. W
  24. X
  25. Y
  26. Z
  27. #