Combining 2011–2019 NSFG Data

For Everyone

Key points

  • Review this information to combine multiple two-year National Survey of Family Growth (NSFG) file releases from 2011–2019.
  • Find detailed technical guidance about using case weights to analyze NSFG files for 2011–2019.
  • Explore in-depth information about considerations for using these combined files.
Three tree trunks shaped like upstretched hands under leaves, says National Survey of Family Growth

Combining data across NSFG file releases

This page provides information for users who want to combine and analyze data from multiple 2-year file releases in the 2011–2019 survey period for the National Survey of Family Growth (NSFG).

This page does not provide combined data files. This page provides technical guidance for data users who want to combine the data themselves.

This page also offers technical guidance on using case weights provided to create 4-, 6-, and 8-year NSFG files for analysis. Also included are considerations for using these combined files.

For information on file combinations that include data from 2006–2010 or older, see Appendix 2 in the 2013–2015 NSFG User's Guide.

Available case weights for 4-, 6-, and 8-year combinations

Based on the continuous NSFG fieldwork period from September 2011 through September 2019, separate 4-, 6-, and 8-year combined-file case weights have been provided for all possible combinations that data users might want to analyze.

These specially prepared combined-file case weights are designed to represent population totals for men and women ages 15–44 (or 15–49) at the approximate midpoint of data collection over these fieldwork periods, as shown in the table below.

File Combinations Final post-stratified, fully adjusted case weight Reference point for population totals
Four-year files
2011 - 2015 WGT2011_2015 July 2013
2013 - 2017 WGT2013_2017 July 2015
2015 - 2019 WGT2015_2019 July 2017
Six-year files
2011 - 2017 WGT2011_2017 July 2014
2013 - 2019 WGT2013_2019 July 2016
Eight-year file
2011 - 2019 WGT2011_2019 July 2015

Combined-file weights vs 2-year weights

There may be analyses that use a combined file where it is more appropriate to use the weights from each individual 2-year data release instead of the prepared single case weight for the various combined-file combinations.

Using individual 2-year file weights

If your goal is to compare point estimates (such as percentages or means) between survey periods across your combined NSFG data span and not to estimate population sizes for the full span, use the individual 2-year file weights provided with each data release. For this approach, you will need to define a new variable to—

  • Hold each respondent's 2-year file weight across all data files you are combining
  • Indicate each of the 2-year survey periods, or their respective midpoints of 2012, 2014, 2016 or 2018 (so that you can account for the different data sources)

Using combined-file weights

If your goal is to estimate population sizes, as well as other point estimates, for the full span of your combined file, then use the combined-file weights, which treat the combined survey periods as a single survey period for purposes of statistical inference. Estimating population sizes for a combined file using the separate 2-year case weights will result in inflated, inaccurate population size estimates.

The combined-file weights have been appropriately scaled and defined to represent the NSFG population of inference at the midpoint of the full span of years for each combined-file option.

While combining multiple 2-year NSFG data files may be beneficial for analyses of rare events that require a larger sample size, analysts should use caution in interpreting estimates based on data from the entire time period, as it may not be appropriate to estimate or interpret such "weighted averages" across broad spans of years. For example, if the estimates from separate 2-year data files vary significantly, the estimate derived from the combined data may be misleading.

Also, variations seen across the separate 2-year data files may be due to changes in the outcome of interest and/or changes in the population composition over time (particularly with age, race, and other factors for which the weights have been adjusted or post-stratified).

Age range expansion

Beginning in September 2015, NSFG expanded its age range from 15–44 to 15–49. Note that when combining the 2015–2017 and 2017–2019 NSFG with older data files, respondents ages 45–49 will not have values on the 4-, 6-, and 8-year file weights.

If your analysis requires use of NSFG data before 2015, you will be limited to the age range of 15–44.

The table below shows the total numbers of respondents with weight values corresponding to each 4-, 6-, and 8-year file combination of NSFG data.

File Combinations   Age range with valid value on weight Total respondents Total male respondents Total female respondents
Four-year files
2011 - 2015 15 -44 20,621 9,321 11,300
2013 - 2017 15 -44 19,095 8,505 10,590
2015 - 2019 15 -49 21,441 9,746 11,695
Six-year files
2011 - 2017 15 -44 29,511 13,320 16,191
2013 - 2019 15 -44 29,137 13,129 16,008
Eight-year file
2011 - 2019 15 -44 39,533 17,944 21,609

Comparability of variables across releases

When selecting the variables for your analyses, you may wish to consult Appendix 4b and Appendix 4c of the 2017–2019 NSFG User's Guide. These appendices provide crosswalks of comparable recodes across female and male data for 2011–2013, 2013–2015, 2015–2017, and 2017–2019.

When combining NSFG data from multiple 2-year file releases, SAS users may receive a warning about variable lengths differing for some variables. Appendix 2 from the 2015–2017 NSFG User's Guide explains what may trigger this warning. This guide also describes how to handle a particular case with the QUARTER variables when combining 2011–2013 data with later file releases.

Downloadable case weights

Below are links for ASCII files—one for male respondents and one for female respondents—containing weights for all available 4-, 6-, and 8-year combined files for the period 2011–2019. The female weights file can also be used with female pregnancy file.

The variable CASEID, unique for each NSFG respondent, is included for merging these weights into the combined data file a user has created.

Program statements

The SAS, SPSS, and Stata set-up statements below are for all 4-, 6-, and 8-year combined-file weights available for 2011–2019.

Content Source
About the National Center for Health Statistics
About this page
Published: November 19, 2026
Updated: November 19, 2026

This page was last updated on this date. Updates may include minor edits, image changes, or other modifications to page content.

Reviewed: November 19, 2026

The information on this page was last reviewed by subject matter experts to ensure accuracy.