Letter to All Respirator Manufacturers
NOTE: This page is archived for historical purposes and is no longer being maintained or updated.
Issue Date: March 11, 2005
From: Heinz W. Ahlers, Acting Chief, Respirator Branch, National Personal Protective Technology Laboratory
Subject: Meeting for All Respirator Manufacturers to be Held on April 13, 2005
The National Institute for Occupational Safety and Health (NIOSH), National Personal Protective Technology Laboratory (NPPTL), Respirator Branch, is announcing a meeting for all respirator manufacturers to be held on April 13, 2005, at the Sheraton Station Square Hotel, 7 Station Square Drive, Pittsburgh, Pennsylvania. An agenda is being developed and will be posted in the near future. The meeting will start at 11:00 a.m. and will adjourn by 5:00 p.m.
Topics to be addressed include discussion of the Standard Application Procedures (SAP) comments, moving forward to implement the release of the procedures, new NPPTL and Respirator Branch organizational structures, and follow-up on replacement documents.
All manufacturer representatives, manufacturer application preparers, and other interested parties are welcome to attend.
Interested parties should make hotel reservations directly with the Sheraton Station Square (412/261-2000 / 1-888-325-3535) before the cut-off date of March 25, 2005. You must reference the NIOSH/NPPTL Meeting to receive the special group rate of $85 per night. Driving directions to the hotel are enclosed.
Please confirm your attendance to this meeting by completing and submitting a registration form. You may complete and submit the electronic registration form or print the posted form and fax it to the NPPTL Event Management Office at 304-225-2003
For further information, please contact the NPPTL Event Management Office, 3604 Collins Ferry Road, Suite 100 , Morgantown, West Virginia 26505-2353, Telephone 304-599-5941 x138, Fax 304-225-2003, E-mail firstname.lastname@example.org.
Register for this Meeting
- Page last reviewed: March 11, 2005 (archived document)
- Content source:
- National Institute for Occupational Safety and Health National Personal Protective Technology Laboratory