Small Business Innovation Research (SBIR)
Easy-to-use Electric Low Anchor Tether Winch for Child Car Seats (Phase II)
Project Period: 08/2010 - 07/2012
Application/Grant Number: 2R44-CE001180-02A1
Principal Investigator: Sara Seifert, PhD
Minnesota Health Solutions, Inc.
1987 Princeton Road
St. Paul, MN 55145
DESCRIPTION (provided by applicant): Motor vehicle crashes are the leading cause of death among children in the United States. Child safety seats provide increased protection for children in motor vehicles and have been observed to reduce death and injury rates by more than 70%. A child must be properly belted into a properly installed child restraint to achieve maximum protection. Several large studies have observed that only 10% to 20% of children are correctly harnessed into correctly installed seats. One of the most common errors involves the installation of the child seat in the vehicle. In most vehicles manufactured prior to 2002, a child seat is attached using the vehicle safety belts. In vehicles newer than 2002, a child seat may be attached using the Lower Anchors and Tethers for Children (LATCH) system. LATCH is designed to make installation of child safety seats easier by providing two lower anchors at the seat bight (the intersection of the seat back and cushion) onto which a rigid or flexible strap from a child seat is attached. Regardless of attachment modality, the seatbelt or flexible LATCH tether must be aggressively tensioned (greater than 30 lbs. typically) to achieve proper installation. Recent studies have observed from 50% to 100% of inspected child restraints held in place by safety belts were too loose. Similarly, the most common error associated with LATCH installations has been observed to be a loose lower anchor strap, which was observed in 30% of installations. Loose child safety seat anchors increase the relative movement between the child safety seat and the vehicle thus increasing the likelihood of impact of the occupant, in particular of the head, with vehicle interior. The objective of this project is to develop an inexpensive power-retractable flexible lower anchor strap for child safety seats. This powered anchor strap will reduce the physical strength and agility required to properly tighten a child safety seat. We hypothesize that a powered anchor strap will increase proper child seat installation rates, thereby reducing motor vehicle crash injuries and deaths among children.
- Page last reviewed: November 1, 2010
- Page last updated: November 1, 2010
- Content source:
- Content source: Centers for Disease Control and Prevention, National Center for Injury Prevention and Control