Exposure and emissions monitoring during carbon nanofiber production - part II: polycyclic aromatic hydrocarbons.
Ann Occup Hyg 2011 Nov; 55(9):1037-1047
Production of carbon nanofibers and nanotubes (CNFs/CNTs) and their composite products is increasing globally. High-volume production may increase the exposure risks for workers who handle these materials. Though health effects data for CNFs/CNTs are limited, some studies raise serious health concerns. Given the uncertainty about their potential hazards, there is an immediate need for toxicity data and field studies to assess exposure to CNFs/CNTs. An extensive study was conducted at a facility that manufactures and processes CNFs. Filter, sorbent, cascade impactor, bulk, and microscopy samples, combined with direct-reading instruments, provided complementary information on air contaminants. Samples were analyzed for organic and elemental carbon (OC and EC), metals, and polycyclic aromatic hydrocarbons (PAHs), with EC as a measure of CNFs. Transmission electron microscopy with energy-dispersive X-ray spectroscopy also was applied. Fine/ultrafine iron-rich soot, PAHs, and carbon monoxide were production byproducts. Direct-reading instrument results were reported previously [Evans DE et al. (Aerosol monitoring during carbon nanofiber production: mobile direct-reading sampling. Ann Occup Hyg 2010; 54:514-31)]. Results for time-integrated samples are reported as companion papers in this issue. OC and EC, metals, and microscopy results are reported in Part I (Birch et al., 2011), whereas results for PAHs are reported here. Naphthalene and acenaphthylene were the dominant PAHs with average concentrations ranging from 115 to 336 microg m-3 and 35 to 84 microg m-3, respectively. Concentrations of other PAHs ranged from approximately 1 to 10 microg m-3.
Nanotechnology; Nanofibers; Nanotubes; Risk-analysis; Hazardous-materials; Industrial-hazards; Industrial-exposures; Biological-effects; Toxic-effects; Toxic-materials; Sampling; Sampling-equipment; Sampling-methods; Air-contamination; Air-sampling; Air-sampling-equipment; Metals; Polycyclic-aromatic-hydrocarbons; Microscopy; Spectrographic-analysis; Spectroscopes; Ultrafine-particles; Aerosols;
Author Keywords: carbon nanofiber; nanomaterial; nanotube; occupational exposure; polycyclic aromatic hydrocarbon; ultrafine aerosol
M. Eileen Birch, Division of Applied Research and Technology, National Institute for Occupational Safety and Health, 4676 Columbia Parkway, MS-R5, Cincinnati, OH 45226, USA
7440-44-0; 91-20-3; 7439-89-6; 208-96-8
Annals of Occupational Hygiene