NIOSHTIC-2 Publications Search
Protecting miners from electrical arcing injury.
IAS '07: Conference Record of the 2007 IEEE Industry Applications Conference: Forty-second IAS Annual Meeting, September 23-27, 2007, New Orleans, Louisiana. Piscataway, NJ: Institute of Electrical and Electronics Engineers, 2007 Sep; 4:1373-1380
Electrical arcing injuries are the most common form of electrical injury in mining. MSHA data show that 381 "non-contact electric arc burn" injuries occurred in the mining industry from 1996 - 2005. A more detailed study of data from 1990-2001 showed that five types of apparatus - circuit breakers, conductors, nonpowered hand tools, electrical meters and test leads, and connectors and plugs were involved in two-thirds of the lost workday injuries. Many of the protections from electrical arcing injury available to workers in other industries stem from the application of National Fire Protection Association Standard 70E - Standard for Electrical Safety in the Workplace (NFPA 70E). NFPA 70E is a generally accepted industry guideline document, but excludes underground mining from its scope. Many of its practices and procedures, however, can be applied in the mining workplace to supplement the existing electrical safety requirements of Title 30 Code of Federal Regulations. This paper describes how NFPA 70E can be applied to mining workplaces after an analysis of the mine power system electrical arcing hazards has been completed (and Hazard/Risk Categories determined) using the tables from NFPA 70E or the calculation method as described in IEEE 1584. NFPA 70E can then be used to determine the levels and types of personal protective equipment (PPE) needed to protect miners against burn injuries. Appropriate lockout and tagout (LOTO) procedures for use in the mining industry are also described. Suggestions for better selection of electrically-rated hand tools are included. Recommendations for electrical meter selection and use based on transient withstand capability are also discussed.
Mining-industry; Control-technology; Electrical-shock; Electrical-safety; Electrical-hazards; Electrical-equipment; Injury-prevention; Accident-prevention; Accident-rates; Burns; Protective-equipment; Personal-protective-equipment
U.S. DHHS, CDC, NIOSH, Pittsburgh Research Laboratory, 626 Cochrans Mill Road, P.O. Box 18070, Pittsburgh, PA 15236 USA
IAS '07: Conference Record of the 2007 IEEE Industry Applications Conference: Forty-second IAS Annual Meeting, September 23-27, 2007, New Orleans, Louisiana
PA; LA; NJ
Page last reviewed: September 2, 2020
Content source: National Institute for Occupational Safety and Health Education and Information Division