NIOSHTIC-2 Publications Search
Twenty-four conferences; more than one-hundred and seventy papers; understanding roof bolt selection and design still remains priceless.
Tadolini SC; Mazzoni RA
Proceedings of the 25th International Conference on Ground Control in Mining, August 1-3, 2006, Morgantown, West Virginia. Peng SS, Mark C, Finfinger GL, Tadolini S, Khair AW, Heasley KA, Luo Y, eds. Morgantown, WV: West Virginia University, 2006 Aug; :382-389
The International Ground Control Conference in Mining has always provided an open forum for the publication, presentation, discussion, and often heated debate on roof bolting systems mostly with attention to how, when, and why they work. During the last 24 Conferences at least 170 papers have been presented by International Experts on these "simple" devices that range in length from 30-inches to 20 ft and from 5/8 to 2 inches in diameter. Roof bolts are primarily mechanically anchored, glued, cemented, or driven. Bolts are placed vertically, angled, or tied together with special fixtures (trusses and slings). They have been termed active, passive, stick-slip, and several other descriptive acronyms or mining slang expressions. This retrospective paper will present the changes in bolt types and usage, point out some of the biggest myths and hail the most significant advances (according to the authors' opinions of course).
Ground-control; Ground-stability; Mining-industry; Underground-mining; Coal-mining; Mine-shafts; Mine-seals; Miners; Underground-miners; Coal-miners
Peng SS; Mark C; Finfinger GL; Tadolini SC; Khair AW; Heasley KA; Luo Y
Proceedings of the 25th International Conference on Ground Control in Mining, August 1-3, 2006, Morgantown, West Virginia
Page last reviewed: September 2, 2020
Content source: National Institute for Occupational Safety and Health Education and Information Division