NIOSHTIC-2 Publications Search
Computer simulation of ground behavior and rock bolt interaction at Emerald Mine.
Gale WJ; Mark C; Oyler DC; Chen J
Proceedings of the 23rd International Conference on Ground Control in Mining, August 3-5, 2004, Morgantown, West Virginia. Peng SS, Mark C, Finfinger GL, Tadolini SC, Heasley KA, Khair AW eds., Morgantown, WV: West Virginia University, 2004 Aug; :27-34
A collaborative project between RAG Emerald Mine, NIOSH, and SCT Operations was conducted to investigate ground behavior, reinforcement performance, and stress redistribution in a coal mine entry subjected to a severe horizontal stress concentration. Field measurements indicated that the stresses applied to the study site nearly doubled during longwall mining, resulting in roof deformations extending to a height of 4.8 m (16 ft) above the entry. This paper focuses on the computer simulation that was undertaken to provide more insight into the roof behavior and rock bolt interaction during mining. The model's input rock properties were derived from extensive lab testing, and the model itself simulated a broad range of failure mechanisms. The effects of different bolt patterns on roadway behavior were evaluated. Comparison between the model results and the field measurements indicated that the model effectively simulated the critical elements of the actual roadway's behavior. With the confidence gained, the model was used as a baseline for additional simulations that evaluated the expected performance of alternative roof support systems. The study will also provide a benchmark data set for future applications of numerical modeling to U.S. underground coal mining.
Ground-control; Coal-mining; Safety-research; Simulation-methods; Models; Underground-mining
NIOSH Pittsburgh Research Laboratory, P.O. Box 18070, Pittsburgh, PA 15236
Peng SS; Mark C; Finfinger GL; Tadolini SC; Heasley KA; Khair AW
Proceedings of the 23rd International Conference on Ground Control in Mining, August 3-5, 2004, Morgantown, West Virginia
Page last reviewed: September 2, 2020
Content source: National Institute for Occupational Safety and Health Education and Information Division