In-depth survey report of a water spray device for suppressing respirable and crystalline silica dust from jackhammers at E.E. Cruz Company, South Plainfield, New Jersey (superseded).
Echt A; Sieber K; Williams D; Cantrell A; Schill DP; Lefkowitz D; Sugar J; Hoffner K
Cincinnati, OH: U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, EPHB 282-11c, 2004 Apr; :1-14
This document has been superseded and the new version can be found <a href="https://www.cdc.gov/niosh/surveyreports/pdfs/282-11c-2.pdf"target="_blank">here</a>. The objective of this study was to quantify the exposure reduction that could be achieved through the use of a water spray attachment while breaking concrete with jackhammers. The effectiveness of the water spray examined in this study was evaluated by measuring the reduction in the respirable dust and quartz exposures in the breathing zones of two construction workers when the dust control device was used compared to the exposure when no dust control device was used. Respirable dust exposure was measured in real time using a portable laser photometer. In addition, personal breathing zone samples for respirable dust and respirable crystalline silica were collected and analyzed using established NIOSH methods. Water applied using a solid cone nozzle at a flow rate of 300 mL of water per minute resulted in a 69 to 71 % reduction in respirable dust exposure and a 77% reduction in quartz exposure. A water flow rate of 250 mL/minute resulted in a 42 to 43% reduction in respirable dust exposure and a 39% reduction in silica exposure. Use of the control with a clogged nozzle resulted in exposure increases. The best exposure reduction demonstrated in these trials would not reduce exposures below the applicable exposure limits for quartz and respirable dust containing quartz.
Control-technology; Engineering-controls; Region-2; Respirable-dust; Quartz-dust; Construction-equipment; Construction-workers; Occupational-exposure; Exposure-assessment; Exposure-limits; Jack-hammers; Silica-dusts; Tools; Equipment-design; Equipment-operators; Control-equipment; Dust-control-equipment; Dust-exposure; Breathing-zone; Photometry; Sampling; Concretes
National Institute for Occupational Safety and Health, Division of Applied Research and Technology, Engineering and Physical Hazards Branch, 4676 Columbia Parkway, Mail Stop R-5, Cincinnati, OH 45226-1998
Field Studies; Control Technology
NTIS Accession No.
Research Tools and Approaches: Control Technology and Personal Protective Equipment
National Institute for Occupational Safety and Health