NIOSHTIC-2 Publications Search
Advances in remote sensing techniques for monitoring rock falls and slope failures.
Girard-JM; Mayerle-RT; McHugh-EL
Proceedings of the 17th International Conference on Ground Control in Mining, August 4-6, 1998, Morgantown, West Virginia. Peng SS, Holland CT, eds., Morgantown, WV: West Virginia University, 1998 Aug; :326-331
Ground control problems at surface mining operations can occur for a variety of reasons. Stress, gravity loading, rock strength, geology, pore pressure, weather effects, underground workings, and many other factors contribute to slope instabilities that range from small rock falls to massive slides of material. While some of these failures can be predicted or controlled by preventive measures, each year many completely unexpected failures occur. Current methods for monitoring generally involve measuring displacements at a few, selected points in and around the suspected area of instability. While most of the displacements along these points will be in a downslope direction, freeze-thaw cycles of water-filled joints, horizontal stresses or pressure, buoyancy in saturated soils, human measurement errors, or other situations can produce deformation in almost any direction, even without any instability in a slope. Determination of which, if any of the observed movements represents a potential hazard is essential. Because of the enormous surface area of many large open-pit mines, several varieties and scales of instability can occur. Small, unexpected rock falls may indeed be more hazardous than a massive failure that involves slow displacement of material over a longer period of time. Complete vigilance to detect all small potential falling blocks is neither feasible nor economical and certainly is not attainable using today's most common point displacement monitoring techniques. As part of an on-going study at the Spokane Research Laboratory, several new methods for monitoring slope instabilities are being investigated. This paper describes the potential adaption of systems such as interferometric synthetic aperture radar, imaging spectroscopy, and time-domain reflectometry, to slope monitoring and design.
Mining-industry; Underground-mining; Mine-safety; Ground-control; Slope-failures
National Institute for Occupational Safety and Health, Spokane Research Laboratory, Spokane, WA 99207
Other Occupational Concerns
Proceedings of the 17th International Conference on Ground Control in Mining, August 4-6, 1998, Morgantown, West Virginia
Page last reviewed: September 2, 2020
Content source: National Institute for Occupational Safety and Health Education and Information Division