NIOSHTIC-2 Publications Search
Preparation of PBo2 Anode.
U S Pat 4 026 786 1977 May; :
A method is described for the electrodeposition of pbo2 for anodes to be used in the electrowinning of metals. Thus, to make an anode, 99.9 pct ti sheet 0.15 X 3 x 6 in was used as the substrate and on it pbo2 was deposited from a bath containing hno3 100, pb(no3)2 320, cu(no3)2 0.3, and 325-mesh ceramic beads 5 g/l at 40 a/ft2. At the end of 8 h, a firmly adherent 0.05-In-thick layer of pbo2 was formed and this after 30 days in 200 g/l h2so4 at 40 deg c and 120 a/ft2 showed no signs of deterioration. Anodes of this kind were used successfully in the electrowinning of both cu and zn.
U.S. Pat. 4,026,786; May 31, 1977; Chem. Abstr. 84:P157,254t
Page last reviewed: September 2, 2020
Content source: National Institute for Occupational Safety and Health Education and Information Division