NIOSHTIC-2 Publications Search
Changing Powder Distribution in the Highwall Holes Reduces Overbreak and Rockfall Hazards.
Stachura VJ; Cumerlato CL
Proceeds 15th Ann Conf on Explosives & Blasting Tech Soc Explosives Eng PP 11-24 :11-24
The U.S. Bureau of Mines conducted a series of tests to develop a blasting method that would reduce overbreak and rockfall hazards at a limestone quarry in northeastern Wisconsin. Reductions in overbreak were achieved by shortening the main explosive column and reducing the explosive load in shortened stemming zones in shotholes which were to form the highwalls. Two blasthole diameters, 3 and 4 in, were used with 7- by 7-ft and 9- by 12-ft burdens and spacings respectively. Anfo, comsol 300 or poweran were used in the body of the shots, and gelmax or 40 pct extra dynamite cartridges were used in the reduced-load zones. Smoother highwalls were visually apparent; however, further analyses by seismic refraction techniques were performed as an aid to studying overbreak within the rock mass.
Proceeds 15th Ann. Conf. on Explosives & Blasting Tech. Soc. Explosives Eng., PP. 11-24
Page last reviewed: September 24, 2021
Content source: National Institute for Occupational Safety and Health Education and Information Division