NIOSHTIC-2 Publications Search
Elastic Pressure Distortion of the Volumes of a 1,000-Atmosphere Burnett Compressibility Apparatus Over the Temperature Range O Deg. to 75 Deg. C.
NTIS: PB 190 974 :22 pages
A removable-jacket distortion apparatus was constructed and used to measure distortion coefficients for two high-pressure vessels. The measured distortion coefficients were used to compute distortion coefficients for volumes v1 and (v1 + v2) of a 1,000-atmosphere burnett compressibility apparatus for the temperature range o deg. to 75 deg. C. Young's modulus for armco 17-4 ph stainless steel, heat treated to condition h1150-m, was computed from experimentally determined distortion coefficients. A 10- to 14-percent correction to the values obtained for young's modulus may be required because pressure vessel end effects were neglected. The distortion coefficients of the compressibility apparatus are believed to be accurate to about 1 percent.
IH; Report of Investigation;
NTIS Accession No.
NTIS: PB 190 974
Page last reviewed: March 11, 2019
Content source: National Institute for Occupational Safety and Health Education and Information Division