NIOSHTIC-2 Publications Search
Application of a Diffusion Model to Oxide Sintering.
Messelt-CD; Stanley-DA; Landis-EK
NTIS: PB 300 399 :10 pages
The Bureau of Mines investigated the application of a diffusion model to sintering rate data developed for lithium titanium ferrite. The data were obtained by sintering pressed pellets under identical conditions for various times up to 11 hours. Stereological measurements were made on polished sections, and sintering rates were calculated. A model for intermediate stage sintering was fitted to the stereological data. This procedure produced a method by which these type data could be used to study the relative importance of volume and grain-boundary diffusion under a variety of sintering conditions. The work upon which this report is based was done under an agreement between the Bureau of Mines, U.S. Department of the Interior, and the University of Alabama.
IH; Report of Investigation;
NTIS Accession No.
NTIS: PB 300 399
Page last reviewed: September 2, 2020
Content source: National Institute for Occupational Safety and Health Education and Information Division