NIOSHTIC-2 Publications Search
Methane contents of oil shale from the Piceance Basin, CO.
Schatzel SJ; Hyman DM; Sainato A; Lascola JC
Pittsburgh, PA: U.S. Department of the Interior, Bureau of Mines, RI 9063, 1987 Jan; :1-32
The Bureau of Mines determined the gas contents of 135 oil shale samples obtained from approximately 630 ft of core drilling. Drilling was done within a projected mining zone of the Cathedral Bluffs Mine, located in the Piceance basin of western Colorado. Methane contents were determined by the modified direct method, which can measure the volumes of several gases released from or reacted with mine rock without destructive sample treatment. Over the duration of the test, nitrogen was largely unreactive, co2 increased slightly, oxygen decreased markedly, and methane increased more than the total increase of all contained gases. The gas volumes were normalized per unit sample mass and are given in cubic centimeters per gram. Common time indices for test duration of 3, 40, and 125 days were used to compare methane desorption among samples. The means of the sample populations for these indices were 0.0316, 0.114, and 0.195 Cm3/g, respectively. These quantities are lower than those reported in a Bureau emissions study at the Horse Draw Mine in the Piceance Basin. Oil shale samples that were gas enriched beyond the mean methane contents frequently contained bitumens and pyrite.
Mine-gases; Mining-industry; Methanes; Methane-drainage; Methane-control; Explosive-gases; Explosive-atmospheres; Underground-mining; Coal-mining; Control-technology; Engineering-controls; Bitumens
74-82-8; 7727-37-9; 8052-42-4; 1309-36-0
IH; Report of Investigations
NTIS Accession No.
Pittsburgh, PA: U.S. Department of the Interior, Bureau of Mines, RI 9063
Page last reviewed: November 19, 2021
Content source: National Institute for Occupational Safety and Health Education and Information Division