NIOSHTIC-2 Publications Search
Design and testing of joining sleeves for trailing cable ground and pilot wires.
Pittsburgh, PA: U.S. Department of the Interior, Bureau of Mines, H0377042, 1979 Aug; :1-121
The purpose of this work was to develop a ground and pilot connector that will significantly improve mine trailing cable splice performance. The connector design includes connectors for splicing ground and pilot conductors. A distinction is made between connectors suitable for splicing round and flat ground and pilot conductors. A discussion on the suitability of round cable for trailing cable applications is included. A field test was conducted to confirm ground and pilot connector laboratory data. The tests proved the viability of the connector designs and recommended installation techniques in a mine environment.
Crimped connectors; Design; Electric connectors; Field tests; Mines(Excavations); Mining equipment; Power lines; Splices; Splicing; Trailing cables
CP; Final Contract Report
NTIS Accession No.
OFR 55-82; Contract-H0377042
Pittsburgh, PA: U.S. Department of the Interior, Bureau of Mines, H0377042
Page last reviewed: September 2, 2020
Content source: National Institute for Occupational Safety and Health Education and Information Division