NIOSHTIC-2 Publications Search
Modification of an analytical procedure for isocyanates to high speed liquid chromatography.
Vogt-CR; Ko-CY; Ryan-TR
Environmental Trace Substance Research Center, University of Missouri, Columbia, Missouri 1976 Apr; :1-93
The analysis of the industrial isocyanates using high speed liquid chromatography is shown and the advantages of this method over that of the thin layer chromatography counterpart are demonstrated. Minimum detectable limit of 2 nanograms was observed. Linearity up to 1,600 nanograms has been shown on the 25 centimeter Partisil 10 and 5 centimeter Partisil 5 columns. Reproducibility of repeated injections are within experimental errors. Samples are stable for at least 10 days. Column life and efficiency can be preserved by flushing the column daily and minimizing the amount of unreacted nitro reagent injected. Specific compounds that are qualitatively and quantitatively analyzed by the modified method are those generally found in working environments, i.e., 2,4-toluene- diisocyanate (584849); 2,6-toluene-diisocyanate, 4,4'- methylenebis(phenylisocyanate), 1,6-hexane-diisocyanate, and 1,3,5- tris(6-isocyanatohexyl)biuret. (Contract No. 210-75-0052)
NIOSH-Contract; Contract-210-75-0052; Analytical-methods; Industrial-chemicals; Toxic-substances; Cyanates; Trace-analysis; Air-quality-measurement; Microanalysis;
NTIS Accession No.
Environmental Trace Substance Research Center, University of Missouri, Columbia, Missouri
Page last reviewed: September 2, 2020
Content source: National Institute for Occupational Safety and Health Education and Information Division