Mining Publication: Effect of Ground Control Mesh on Dust Sampling and Explosion Mitigation

Original creation date: July 2015

Authors: D Alexander, L Chasko

Peer Reviewed Journal Article - July 2015

NIOSHTIC2 Number: 20046601

Min Eng 2015 Jul; 67(7):111-117

Researchers from the National Institute for Occupational Safety and Health's Office of Mine Safety and Health Research conducted an assessment of the effects that ground control mesh might have on rock and float coal dust distribution in a coal mine. The increased use of mesh to control roof and rib spall introduces additional elevated surfaces on which rock or coal dust can collect. It is possible to increase the potential for dust explosion propagation if any float coal dust is not adequately inerted. In addition, the mesh may interfere with the collection of representative dust samples when using the pan-and-brush sampling method developed by the U.S. Bureau of Mines and used by the Mine Safety and Health Administration for band sampling. This study estimates the additional coal or rock dust that could accumulate on mesh and develops a means to collect representative dust samples from meshed entries.

First page of Effect of Ground Control Mesh on Dust Sampling and Explosion Mitigation
Peer Reviewed Journal Article - July 2015

NIOSHTIC2 Number: 20046601

Min Eng 2015 Jul; 67(7):111-117


Page last reviewed: 5/9/2018 Page last updated: 5/9/2018