Skip directly to search Skip directly to A to Z list Skip directly to page options Skip directly to site content

NIOSHTIC-2 Publications Search

Search Results

Development of a dust collector inlet hood for enhanced surface mine drill dust capture.

Authors
Organiscak-JA; Page-SJ
Source
Int J Surface Min Reclam Environ 2005 Mar; 19(1):12-28
NIOSHTIC No.
20026879
Abstract
Surface mine drill operators have the highest frequency of overexposure to quartz dust, and drilling is one of the occupations associated with the highest incidence of silicosis. Previous field assessment studies of drilling machines indicate that they can emit some of the highest airborne respirable quartz dust concentrations found at surface mining operations. Typically, the surface mine drills are equipped with dry dust collector systems to capture the dust being flushed with compressed air from the hole during the drilling process. The overall control effectiveness of the dust collector system is initially dependent on capturing the dust cloud at the source via the collector inlet. To assist the initial capture of the dust being flushed from the drill hole, the bottom of the drill deck is typically shrouded or enclosed on all sides to help contain the dust for the collector inlet plenum located on the underside perimeter of the drill deck. Openings, gaps, and breaches in the shroud enclosure permit dust to escape dust collector capture. NIOSH has developed a collector inlet hood that reconfigures the inlet plenum around the drill steel and above the hole to enhance dust capture. Lab development and testing show that this inlet hood improves dust capture by an average of nearly 50% over a wide range of collector flows and shroud leakage areas. This article describes the lab and subsequent field testing of this inlet hood concept.
Keywords
Dust-collector; Respirable-dust; Silica; Dusts; Surface-mining; Quartz-dust; Silicosis; Silica-dusts; Lung-disease; Occupational-health; Occupational-respiratory-disease; Health-hazards; Mining-industry; Dust-control; Dust-collectors
Contact
NIOSH Pittsburgh Research Laboratory, P.O. Box 18070, Pittsburgh, PA 15236
CODEN
IJREEG
Publication Date
20050301
Document Type
Journal Article
Email Address
JOrganiscak@cdc.gov
Fiscal Year
2005
NTIS Accession No.
NTIS Price
Issue of Publication
1
ISSN
1389-5265
NIOSH Division
PRL
Priority Area
Research Tools and Approaches: Control Technology and Personal Protective Equipment
Source Name
International Journal of Surface Mining, Reclamation and Environment
State
PA; OH; KY
TOP