CDC logoSafer Healthier People CDC HomeCDC SearchCDC Health Topics A-Z
NIOSH - National Institute for Occupational Safety and Health

Skip navigation links Search NIOSH  |  NIOSH Home  |  NIOSH Topics  |  Site Index  |  Databases and Information Resources  |  NIOSH Products  |  Contact Us

Impact of Respirator use on CO2 Levels and O2 Saturation FY09

NOTE: This page is archived for historical purposes and is no longer being maintained or updated.

Current Information can be found at: Impact of Respirator use on CO2 Levels and O2 Saturation FY10

Objective

  • During a pandemic influenza, healthcare workers (HCW) will be utilizing respirators for protracted periods of time (812 hr shifts) that could lead to CO2 retention, decreases in O2 saturation, and performance decrements. This study will evaluate transcutaneous CO2 levels and O2 saturation associated with respirator use at workrates typical for HCW.
Healthcare workers wearing respirators / Oxygen sensor on ear lobe

Applicable Standards

  • OSHA standard (29 CFR 1910.134) is 19.5% O2 concentration to altitude of 8,000 feet.
  • No current standard exists for CO2 levels in filtering facepiece respirators or elastomeric respirator.
  • Will apply to ISO/TC94/SC15/WG1/PG5 Human Factors O2/CO2 Guidance document currently being developed (N105).

Key Partners

  • Veterans Administration

Stakeholders

  • Healthcare workers (medical, dental, veterinary)
  • Emergency Medical Services (paramedics, firefighters, private ambulance crews)
  • Industrial workers
  • Respirator manufacturers

Project Scope


  • Conduct human physiologic testing in the NPPTL physiology lab
  • Determine CO2 and O2 concentrations in respirator deadspace and simultaneous transcutaneous CO2 levels and O2 saturation while wearing N95FFR, elastomeric , and N95FFR with surgical mask overlay.
  • Correlate respirator deadspace CO2 and O2 concentrations with transcutaneous CO2 levels and O2 saturation.
  • Incorporate data from the project into the development of physiologic guidelines for respirator use.

Milestones

  • Q1 Complete manuscripts describing results of 1st and 2nd phases of study
  • Q2 Submission of manuscripts describing 1st and 2nd phases of study to journal and complete manuscript of phase 3
  • Q3 Revise manuscripts 1 and 2 and resubmit to journal
  • Q4 Revise manuscript 3 and resubmit to journal

Outputs

  • Manuscripts submitted to peer-reviewed journals (0).
  • Presentations at national/international conferences (approx 2).

Outcomes

  • Introduction of physiologic variables (CO2 levels, O2 saturation) into NIOSH respirator selection logic.
  • Appropriate mitigation strategies for elevated CO2 and decreased O2 associated with FFR use incorporated into CDC, NIOSH, WHO, and ISO guidance documents.
  • Effects on respiratory gases of combined N95FFR/surgical mask overlay, used to support/modify CDC, NIOSH, WHO, ISO, etc. standards and guidance documents.
Page last updated: April 05, 2010
Page last reviewed: April 14, 2009
Content Source: National Institute for Occupational Safety and Health (NIOSH)
National Personal Protective Technology Laboratory