NIOSH Mining Safety and Health Topic

EAMP List of Tables

Contents
**EAMP Home
**Foreword
**Abstract
**Executive Summary
**Introduction
**Background
**Methods
**Results & Discussion
**Summary
**References
**List of Figures
**List of Tables
**Appendix A
**Appendix B
Table 1: Laboratory test specifications
Table 2:   Test matrix of simulated clogged air filter experiment
Table 3: Ecom-AC and Ecom-E gas sensor specifications
Table 4:  Caterpillar 3304 emissions at 1,600 rpm and maximum load
Table 5:  Caterpillar 3304 emissions at 1,600 rpm and maximum load
Table 6: Analysis of portable analyzer data versus laboratory analyzer data
Table 7:  Exponential curve fits and statistics
Table 8:  Use of engine speed to verify full load
Table 9:  Emissions of new equipment
Table 10:  Emissions of in-service equipment with torque converters
Table 11: Emissions of in-service equipment with hydrostatic transmissions
Table 12: Comparison of emissions over three repeated tests

Page last updated: October 21, 2008
Page last reviewed: June 20, 2008
Content Source: National Institute for Occupational Safety and Health (NIOSH) Mining Division