International Chemical Safety Cards

PYROMELLITIC DIANHYDRIDE ICSC: 1375
World Health Organization (WHO) International Labour Organization (ILO) United Nations Environmental Programme (UNEP) European Commission National Institute for Occupational Safety and Health (NIOSH)
1,2,4,5-Benzenetetracarboxylic 1,24,5-dianhydride
1,2,4,5-Benzenetetracarboxylic anhydride
1H,3H-Benzo(1,2-c;4,5-c')difuran-1,3,5,7-tetrone
PMDA
C10H2O6 / C6H2(C2O3)2
Molecular mass: 218.1
ICSC #    1375
CAS #     89-32-7
RTECS # DB9300000
EC #         607-098-00-X
March 14, 2001 Validated
TYPES OF HAZARD/ EXPOSURE ACUTE HAZARDS/ SYMPTOMS PREVENTION FIRST AID/
FIRE FIGHTING
FIRE Combustible.
NO open flames.
Powder, water spray, foam, carbon dioxide.
EXPLOSION


EXPOSURE
PREVENT DISPERSION OF DUST!

 •INHALATION Cough. Sore throat. Wheezing. Shortness of breath.
Local exhaust or breathing protection.
Fresh air, rest. Half-upright position. Refer for medical attention.
 •SKIN Redness. Burning sensation.
Protective gloves. Protective clothing.
Remove contaminated clothes. Rinse skin with plenty of water or shower.
 •EYES Redness. Pain. Blurred vision.
Safety goggles, or eye protection in combination with breathing protection.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor.
 •INGESTION Burning sensation.
Do not eat, drink, or smoke during work. Wash hands before eating.
Rinse mouth. Do NOT induce vomiting.
SPILLAGE DISPOSAL STORAGE PACKAGING & LABELLING
Sweep spilled substance into containers; if appropriate, moisten first to prevent dusting. Wash away remainder with plenty of water. (Extra personal protection: P2 filter respirator for harmful particles.)
Dry. Well closed.

Xn symbol
R: 41-42/43
S: 2-22-24-26-37/39
SEE IMPORTANT INFORMATION ON BACK
ICSC: 1375 Prepared in the context of cooperation between the International Programme on Chemical Safety & the Commission of the European Communities (C) IPCS CEC 1994. No modifications to the International version have been made except to add the OSHA PELs, NIOSH RELs and NIOSH IDLH values.

International Chemical Safety Cards

PYROMELLITIC DIANHYDRIDE ICSC: 1375
I

M

P

O

R

T

A

N

T


D

A

T

A
PHYSICAL STATE; APPEARANCE:
WHITE HYGROSCOPIC CRYSTALLINE POWDER , WITH CHARACTERISTIC ODOUR.

PHYSICAL DANGERS:


CHEMICAL DANGERS:
Reacts with water to produce acid.

OCCUPATIONAL EXPOSURE LIMITS:
TLV not established.


ROUTES OF EXPOSURE:
The substance can be absorbed into the body by inhalation of its aerosol.

INHALATION RISK:
Evaporation at 20°C is negligible; a harmful concentration of airborne particles can, however, be reached quickly when dispersed.

EFFECTS OF SHORT-TERM EXPOSURE:
The substance is irritating to the eyes, the skin and the respiratory tract . Exposure at high levels may result in pulmonary hemorrhage.

EFFECTS OF LONG-TERM OR REPEATED EXPOSURE:
Repeated or prolonged contact may cause skin sensitization. Repeated or prolonged inhalation exposure may cause asthma.
PHYSICAL
PROPERTIES
Boiling point: 397-400°C
Melting point: 287°C
Density: 1.68
g/cm³
Solubility in water:
reaction
ENVIRONMENTAL
DATA

N O T E S
The symptoms of asthma often do not become manifest until a few hours have passed and they are aggravated by physical effort. Rest and medical observation are therefore essential. Anyone who has shown symptoms of asthma due to this substance should avoid all further contact with this substance.
ADDITIONAL INFORMATION


ICSC: 1375 PYROMELLITIC DIANHYDRIDE
(C) IPCS, CEC, 1994
IMPORTANT LEGAL NOTICE: Neither NIOSH, the CEC or the IPCS nor any person acting on behalf of NIOSH, the CEC or the IPCS is responsible for the use which might be made of this information. This card contains the collective views of the IPCS Peer Review Committee and may not reflect in all cases all the detailed requirements included in national legislation on the subject. The user should verify compliance of the cards with the relevant legislation in the country of use. The only modifications made to produce the U.S. version is inclusion of the OSHA PELs, NIOSH RELs and NIOSH IDLH values.