Title: Vitamin C
Contact Number: 1-866-441-NCHS
Years of Content: 2005 - 2006
First Published: February, 2009
Access Constraints: None
Use Constraints: None
Geographic Coverage: National
Record Source: NHANES 2005 - 2006
Survey Methodology: NHANES 2005 - 2006 is a stratified multistage probability sample of the civilian non-institutionalized population of the U.S.
Medium: NHANES Web site; SAS transport files
The objectives of this component are:
These data will be used to estimate deficiencies and toxicities of specific nutrients in the population and subgroups, to provide population reference data, and to estimate the contribution of diet, supplements, and other factors to serum levels of nutrients. Data will be used for research to further define nutrient requirements as well as optimal levels for disease prevention and health promotion.
Participants aged 6 years and older who do not meet any of the exclusion criteria are eligible.
Vitamin C (ascorbic acid) in serum is measured using isocratic high performance liquid chromatography (HPLC) with electrochemical detection at 650 mV1. One part serum is mixed with four parts 6% MPA to acidify the serum and stabilize ascorbate. The specimen is frozen at -70°C until analysis. After the specimen is thawed at room temperature and centrifuged at 2,500 rpm, the supernatant is decanted. This supernatant is mixed with a solution containing trisodium phosphate and dithiothreitol (to reduce dehydroascorbate to ascorbate) and an internal standard (1-methyl uric acid). It is re-acidified with 40% MPA to stabilize the ascorbate. The sample is filtered to remove insoluble material. A 10 μL aliquot is injected onto a C-18 reversed-phase column and eluted with a mobile phase containing 14.1 g/L monochloroacetic acid, 0.76 g/L disodium ethylenediamine tetraacetate, 1% (by volume) 10 N sodium hydroxide, and 1.5% (by volume) methanol. It is adjusted to pH 3.00 ± 0.03 with 10 N sodium hydroxide. Quantitation is by peak area and is based on a standard curve generated using three different concentrations of an external standard (0.025, 0.150, and 0.500 mg/dL).
A detailed description of the laboratory method used can be found on the NHANES website.
Serum specimens are processed, stored, and shipped to the Division of Laboratory Sciences, National Center for Environmental Health, and Centers for Disease Control and Prevention for analysis.
Detailed specimen collection and processing instructions are discussed in the NHANES LPM. Vials are stored under appropriate frozen (–20°C) conditions until they are shipped to National Center for Environmental Health for testing.
This file contains no top coding; however, 11 results were set to missing because of possible contamination.
One derived variable was created in this data file. The formula for its derivation is as follows:
The vitamin C in mg/dL was converted to μmol/L by multiplying by 56.78.
Testing for vitamin C began in 2003. Detailed instructions on specimen collection and processing can be found on the NHANES website.
The NHANES quality assurance and quality control (QA/QC) protocols meet the 1988 Clinical Laboratory Improvement Act mandates. Detailed QA/QC instructions are discussed in the NHANES Laboratory/Medical Technologists Procedures Manual (LPM). Read the LABDOC file for detailed QA/QC protocols.
A detailed description of the quality assurance and quality control procedures can be found on the NHANES website.
The analysis of NHANES 2005–2006 laboratory data must be conducted with the key survey design and basic demographic variables. The NHANES 2005–2006 Household Questionnaire Data Files contain demographic data, health indicators, and other related information collected during household interviews. The Household Questionnaire Data Files also contain all survey design variables and sample weights required to analyze these data. The Phlebotomy Examination file includes auxiliary information on duration of fasting, the time of day of the venipuncture, and the conditions precluding venipuncture. The Household Questionnaire and Phlebotomy Exam files may be linked to the laboratory data file using the unique survey participant identifier SEQN.
|Code or Value||Value Description||Count||Cumulative||Skip to Item|
|0.01 to 4.72||Range of Values||7302||7302|