An
accident with a rotary mower can cost you your life! A rotary
agricultural mower can also injure innocent bystanders,
so it is also important that they be alert and aware of
safety rules. Using proper equipment correctly, keeping
equipment in good repair and following safety practices
are the best ways to prevent accidents.
- Use
the right type of mower for the job : Know the job you
are going to do, and use the correct mower for it. Check
your operator's manual for the type of job your mower
is designed to do. For example, don't try to cut brush
with a mower designed only for forage. You could be exposed
to hazards caused by machine failure. Use heavy-duty blades
where they are needed, and use a large enough machine
to do the job properly.
- Keep
others away : Don't allow riders on your tractor, and
keep people away from the work area. Bystanders can be
seriously injured or killed if struck by a thrown object
or run over by the tractor or mower.
- Watch
for objects that can be thrown by the mower and remove
them from the area : Tin cans, stones, wire or other objects
may be hurled by the mower blades, causing serious injury
or death.
- Be
alert to obstacles : Obstacles such as ditches, holes,
rocks and stumps can throw you off the tractor or cause
the tractor to upset. Be especially alert when objects
can be hidden by tall grass, weeds or brush. Use the seat
belt if your tractor is equipped with roll-over protection.
- Before
dismounting for any reason : Disengage the power take-off
(PTO), turn off the engine and set the brakes.
- Be
sure the blades are stopped before approaching the mower
: Many rotary mowers have blades that continue to rotate
for some time after the PTO is disengaged.
- Be
careful turning sharp corners : On pull-type mowers, the
rear tractor wheel could catch the mower frame and throw
it on you. With three-point-hitch-mounted mowers, the
mower could swing outward when you make a turn. Front
wheel weights may be needed to help you keep control.
- Set
your rear tires as wide as possible : Wide-set tires provide
greater tractor stability and lessen the chance of a tractor
overturn (Fig. 1).
Before
operating your mower, study your operator's manual carefully
to familiarize yourself with its maintenance procedures.
Begin
your pre-operational check by making sure the power take-off
is disengaged and the engine is shut off. Look for loose
nuts and bolts.
Blade
sharpness is a key to efficient, safe mowing. Inspect the
blades often, and replace them when they become too dull
for additional sharpening.
Remember
that hazards increase when you are having problems with
the equipment.
Rotary mowers are equipped with runners and safety guards.
To avoid excessive wear on the runners, keep the mower just
high enough so that it does not ride on the runner shoes.
Power
take-off shafts should also be protected by shields or guards.
Keep them in place on the machine.

Disclaimer
and Reproduction Information: Information in NASD does not
represent NIOSH policy. Information included in NASD appears
by permission of the author and/or copyright holder. More
NASD Review: 04/2002
This
document is
AEX-592
,
a series of the Agricultural Engineering Department, Ohio
State University Extension, Ohio State University, Columbus,
Ohio 43210. Publication date: December 1991.
Thomas L. Bean, Safety Leader, Ohio State University Extension,
Ohio State University, Columbus, Ohio 43210. Reviewed by
Dr. Joe Gliem and Dr. Randall Wood.